Lenovo ThinkServer RD530 - Manual (Page 9)

d. Connect the arm marked with A and the arm-rail joint by pulling out the eject button 1 and inserting
the arm into the arm-rail joint 2 .
Figure 10. Connecting the cable management arm and the arm-rail joint
e. Connect the arm marked with B and the slide rail by pulling out the eject button 1 and inserting the
arm into the arm-rail joint 2 . Then connect the arm marked with A and the slide rail by pulling out
the eject button 3 and inserting the arm into the arm-rail joint 4 .
Figure 11. Connecting the cable management arm and the slide rail
9