Lenovo S6000 Tablet - Manual (Page 17)

Chapter 04
Settings & Safety Information
*Specific models only
4-1 WIRELESS & NETWORKS
4-2 DEVICE
4-3 PERSONAL
4-4 SYSTEM
Tap Settings in the applications list to open the Settings interface.
4-1 WIRELESS & NETWORKS
This setting module includes: Wi-Fi, Bluetooth, Data usage and More... (Airplane mode, VPN,
Tethering & portable hotspot, Mobile networks*and USB Internet ).
Wi-Fi
This setting allows you to enable/disable Wi-Fi connections.
When Wi-Fi is enabled, your IdeaTab will automatically scan for available wireless networks,
displaying them in the Wi-Fi network list.
The network status icon, indicates that the network requires no password, and can be connected
to directly. However, indicates that the network has been encrypted, and can be connected to
only after the required password is entered.
You can select any network you want from the list. After selecting the network, tap Connect to
connect directly. Alternatively, select the check box in front of Show advanced options to adjust
the proxy and IP settings in the pop-up text box, and then tap Connect to connect to a network. You
can also select Add network to manually add a network. Tap , then Advanced for advanced
Wi-Fi settings.
Network notification: When activated, the system will notify you if there are any open net
works available.
Keep Wi-Fi on during sleep: You can set Wi-Fi connection policy during sleep mode to
Always, Only when plugged in or Never.