Lenovo LS1922s Wide 18.5 inch LED backlit LCD Monitor User Manual
Lenovo Monitors
Advertising
Table of contents
Document Outline
- Structure Bookmarks
- Figure
- E1922s Wide Flat Panel Monitor User’s Guide
- Product Number
- Product Number
- 60BD-AAR6-WW
- 60BD-AAR6-WW
- Figure
- First Edition (October 2013)
- First Edition (October 2013)
- © Copyright Lenovo 2013.All rights reserved..LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to.governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and.disclosure..LIMITED AND RESTRICTED RIGHTS NOTICE: IF products, data, computer software, or services are delivered pursuant a.General Services Administration "GSA" contract, use, reproduction, or disclosure i
- © Copyright Lenovo 2013
- Contents.
- Contents.
- Product Number....................................................................................................................................................................................................ii.Ł
- Contents..................................................................................................................................................................................................................ii.Ł
- Safety information...............................................................................................................................................................................................iii.Ł
- Safety and Maintenance Guidelines................................................................................................................................................................ iv.Ł
- Chapter 1 Getting started................................................................................................................................................................................. 11.�
- Shipping contents ................................................................................................................................................................................. 11.Product overview ................................................................................................................................................................................. 12.Types of adjustments ..........................................................................................
- Chapter 2 Adjusting and using your monitor .............................................................................................................................................. 21.�
- Comfort and accessibility .................................................................................................................................................................... 21.Arranging your work area................................................................................................................................................................... 21.Quick tips for healthy work habits.........................................................................................
- Chapter 3 Reference information ................................................................................................................................................................... 31.�
- Monitor specifications.......................................................................................................................................................................... 31.Troubleshooting.................................................................................................................................................................................... 32.Manual image setup...............................................................................................
- Appedix A Service and Support .................................................................................................................................................................... A1.
- Registering your option......................................................................................................................................................................A1.Online technical support .................................................................................................................................................................... A1.Telephone technical support................................................................................................
- Appedix B Notices.............................................................................................................................................................................................B1.
- Recycling information..........................................................................................................................................................................B2.Collecting and recycling a disused Lenovo computer or monitor.................................................................................................B2.Disposing of Lenovo computer components..................................................................................................................
- 3AFETY INFORMATION
- Safety and Maintenance Guidelines Important Safety Information
- Safety and Maintenance Guidelines Important Safety Information
- Safety and Maintenance Guidelines Important Safety Information
- The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor.
- Figure
- WARNING: Always connect your monitor, the computer, and other equipment to a grounded (earthed) power outlet. To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. The grounding plug is an important safety feature.
- Figure
- Figure
- CAUTION: To protect your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a power strip with surge protection or uninterruptible power supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labelled as having this ability. Use a power strip whose manufacturer offer
- WARNING: For your safety, be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and located as close to the equipment as possible. To disconnect power from the equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.
- Figure
- CAUTION: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VVF 3G 0.75mm² or H05VVH2F2 3G 0.75mm²) shall be used. An alternative flexible cord is synthetic rubber.
- Safety Precautions
- Safety Precautions
- ■
- ■
- ■
- ■
- Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the power cord does not exceed the rating of the power cord. Look on the power label to determine the ampere rating (Amps or A) for each device.
- ■
- ■
- ■
- Maintenance Guidelines
- Cleaning the Monitor
- Cleaning the Monitor
- The monitor is a highquality optical device that requires special care when cleaning. To clean the monitor, follow these steps:
- 1.
- Figure
- These chemicals may damage the monitor. Do not use liquid or aerosol cleaners. Never use water to.clean an LCD screen..
- 3.
- Chapter 1 Getting started This User’s Guide contains detailed information on the ThinkVision E1922s Wide Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor.
- Shipping contents
- Shipping contents
- The product package should include the following items:
- ●
- E1922s
- Note: To attach a VESA mount, please see “Detaching the monitor stand” on page 27.
- Product overview
- This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range.
- User controls Your monitor has controls on the front which are used to adjust the display.
- For information on how to use these controls, please see “Adjusting your monitor image ” on page 23.
- Figure
- -520
- Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor. Please follow the instructions that came with the cable lock to attach it.
- Setting up your monitor
- This section provides information to help you set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Monitor Safety, troubleshooting and Warranty Guide before carrying out this procedure. 1. Power off your computer and all attached devices, and unplug the computer power cord.
- 2. Connect the analog signal cable to the DSUB connector of the monitor and the other end on the back of the computer.
- Figure
- 3. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VVF 3G 0.75mm² or H05VVH2F2 3G 0.75mm²) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designati
- 4. Power on the monitor and the computer.
- E1922s
- 5. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the onscreen instructions.
- E1922s
- 6. To optimize your monitor image, if using the analog cable, press the Automatic Image Setup key Automatic image setup requires that the monitor is warmed up for at least 15 minutes.
- Note: If automatic image setup does not establish the image that you prefer, perform manual image setup. See “Manual image setup” on page 33.
- Registering your option Thank you for purchasing this Lenovo® product. Please take a few moments to register your product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the following Web site: http://www.lenovo.com/register Lenovo will send you information and updates on your registered p
- Figure
- Chapter 2 Adjusting and using your monitor This section will give you information on adjusting and using your monitor.
- Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www/lenovo.com/healthycomputing
- Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort. Organize you work area to match the way you use materials and equipment. Keep your work area clean and clear for the materials that you typically use and place the items that you use most frequently, such as the computer mouse or telephone, within the easiest reach. Equipment layout and setup play a large role in your working posture. The following topics describe how to optimize equ
- Quick tips for healthy work habits The following information is a summary of some important factors to consider to help you remain comfortable and productive while you use your computer. ● Good posture starts with equipment setup: The layout of your work area and the setup of your computer equipment have a large effect on your posture while using your computer. Be sure to optimize the position and orientation of your equipment by following the tips outlined in “Arranging your work area ” on page 21 so you
- Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Note: The direct access controls are coloured. Table 2-1. Direct access controls
- Icon Control Description
- Figure
- Image Setup
- Activates automatic image adjustment.
- Brightness Direct access to Brightness adjustment.
- Using the OnScreen Display (OSD) controls The settings adjustable with the user controls are viewed through the OnScreen Display (OSD), as shown below.
- Figure
- To use the controls:
- 1.Press
- Figure
- to open the main OSD menu.
- 2.Use
- Figure
- or
- Figure
- to move among the icons. Select an icon and press
- Figure
- to access that
- function. If there is a submenu, you can move between options using
- Figure
- or
- Figure
- , then
- press
- Figure
- to select that function. Use
- Figure
- or
- Figure
- to make adjustments. Press
- Figure
- to
- save.
- 3.Press
- to move backwards through the submenus and exit from the OSD.
- 4.Press and hold
- Figure
- for 10 seconds to lock the OSD. This will prevent accidental
- adjustments to the OSD. Press and hold
- Figure
- for 10 seconds to unlock the OSD and allow
- adjustments to the OSD.
- 5.Enables DDC/CI by default. Use OSD Exit Key, press and hold the
- Figure
- buttons for 10
- seconds to disable/enable DDC/CI function. The words " DDC/CI Disable/DDC/CI/Enable" shows on the screen.
- Table 2-2. OSD functions
- Controls and OSD Icon on Main Submenu Description Adjustments Menu (Analog)
- Brightness/Contrast
- Brightness
- Adjusts overall brightness
- Figure
- Contrast
- Adjusts difference between light and dark areas
- －－－－
- ＋＋＋＋
- －－－－
- ＋＋＋＋
- Image Position
- Horizontal Position
- Moves the image left or right.
- Figure
- Vertical Position
- Moves the image up or Down.
- Image Setup
- Automatic
- Figure
- Manual
- Automatically optimizes the image. Manually optimizes the image. See “Manual image setup” on page 33 ● Clock ● Phase ● Save
- Image Properties
- Colour
- Adjusts intensity of red, green, and blue. Preset mode ● Neutral ● sRGB ● Reddish ● Bluish Custom： ● Red: Increases or decreases the saturation of ‘red’ in the image. ● Green: Increases or decreases the saturation of ‘green’ in the image. ● Blue: Increases or decreases the saturation of ‘blue’ in the image. ● Save: Saves the custom colour choices.
- Table 2-2. OSD functions
- OSD Icon on Main Submenu Description Menu
- Scaling
- ● Original AR Same Aspect Ratio with input signal ● Full Expand image to full screen
- Figure
- Options
- Figure
- Information
- Figure
- Menu Language
- Shows resolution, refresh rate, and product details. Note: This screen does not allow any changes to the settings.
- This section lists the languages supported by your monitor. Note: The language chosen only affects the language of the OSD. It has no effect on any software running on the computer.
- Menu Position Default Custom
- Menu position adjusts menu location on the screen. Returns the menu position to the default settings. ● Horizontal: Changes the horizontal position of the OSD ● Vertical: Changes the vertical position of the OSD. ● Save
- Figure
- Factory Default
- Figure
- Accessibility
- ● Cancel ● Reset Resets monitor to the original factory settings. Controls button and menu settings for accessibility preferences.
- Figure
- Button repeat rate:
- Select
- or
- Figure
- to change.
- ● Off ● Default ● Slow
- Menu time out: Sets the length of time the
- OSD will remain active after the last time a button is pressed.
- Figure
- Exit
- Figure
- Safety and Maintenance Guidelines Important Safety Information
- Exit the main menu
- Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flickerfree. Note: If
- Table 2-3.Factory set display modes
- Addressability
- Addressability
- Understanding power management
- Power management is invoked when the computer recognizes that you have not using your mouse or keyboard for a userdefinable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
- Table2-4.Power indicator
- State Power Indicator Screen Restoring Operation Compliance On Steady green Normal Press a key or move the Standby/ Steady amber Blank mouse. Suspend There may be a slight ENERGY delay reappears. STAR Note: Standby also occurs if there is no image output to the monitor. Off Off Off Press power key to switch on ENERGY There may be a slight delay STAR before the image reappears.
- State Power Indicator Screen Restoring Operation Compliance On Steady green Normal Press a key or move the Standby/ Steady amber Blank mouse. Suspend There may be a slight ENERGY delay reappears. STAR Note: Standby also occurs if there is no image output to the monitor. Off Off Off Press power key to switch on ENERGY There may be a slight delay STAR before the image reappears.
- State Power Indicator Screen Restoring Operation Compliance On Steady green Normal Press a key or move the Standby/ Steady amber Blank mouse. Suspend There may be a slight ENERGY delay reappears. STAR Note: Standby also occurs if there is no image output to the monitor. Off Off Off Press power key to switch on ENERGY There may be a slight delay STAR before the image reappears.
- State Power Indicator Screen Restoring Operation Compliance On Steady green Normal Press a key or move the Standby/ Steady amber Blank mouse. Suspend There may be a slight ENERGY delay reappears. STAR Note: Standby also occurs if there is no image output to the monitor. Off Off Off Press power key to switch on ENERGY There may be a slight delay STAR before the image reappears.
- Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: ● Apply water or liquid directly to your monitor. ● Use solvents or abrasives. ● Use flammable cleaning materials to clean your monitor or any other electrical equipment. ● Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. ● Use any cleaner which contains an antistatic solution or similar additives. Thi
- Detaching the monitor stand 1. After placing the monitor face down on a clean surface or soft cloth, push the hook of the base to remove the stand from the monitor
- 2. Strip down the screws by Anticlockwise direction, remove the stand and then assemble the VESA frame through VESA holes.
- Figure
- Chapter 3 Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information.
- Monitor specifications Table 3-1. Monitor specifications for type-model 60BD-AAR6-WW
- Dimensions Height Depth Width 341.5 mm (13.44 in.) 167.2 mm (6.58 in.) 448.40 mm (17.65 in.) Stand Tilt range Range: 5°/+20° VESA mount Supported 100 mm (3.94 in.) Image Viewable image size Maximum height Maximum width Pixel pitch 470.1 mm (18.51 in.) 230.40 mm (9.07 in.) 409.80 mm (16.13 in.) 0.3 mm (0.010 in.) (V) Power input Supply voltage Max supply current 100240 VAC, 60/50 Hz 1.0 A Power consumption Note: Power consumption figures are for the monitor and the power supply combined. Max Consumption (Wit
- Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table3-2.Troubleshooting
- Problem
- Problem
- Problem
- Problem
- Problem
- Possible
- cause
- Suggested
- action
- Reference
- The words” Out of Range” are shown on the screen, and the power indicator flashing green.
- The words” Out of Range” are shown on the screen, and the power indicator flashing green.
- is
- The system is set to a display mode which is not supported by the monitor.
- ● ● ●
- If you are replacing an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor. If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer. If these options do not work, contact the Customer Support Centre.
- “Selecting a supported display mode” on page 26
- The image quality is unacceptable.
- The image quality is unacceptable.
- The video signal cable is not connected with the monitor or system completely.
- Be sure the signal cable firmly plugged into the system and monitor.
- is
- “Connecting and turning on your monitor” on page 13
- The color settings may incorrect.
- The color settings may incorrect.
- be
- Select another colour from the OSD menu.
- setting
- “Adjusting your monitor image” on page 23
- The automatic image setup function was not performed.
- The automatic image setup function was not performed.
- Perform setup.
- automatic
- image
- “Adjusting your monitor image” on page 23
- The power indicator is not and there is no image.
- The power indicator is not and there is no image.
- lit
- ● ● ●
- The monitor’s power switch is not switched on. The power cord is loose or disconnected. There is no power at the outlet.
- ● ● ● ● ●
- Be sure the power cord is connected properly. Be sure the outlet has power. Power on the monitor. Try using another power cord. Try using another electrical outlet.
- “Connecting and turning on your monitor” on page 13
- Problem
- Problem
- Problem
- Problem
- Problem
- Problem
- Problem
- Problem
- Possible
- cause
- Suggested
- action
- Reference
- Screen is blank and power indicator is steady amber or flashing green
- Screen is blank and power indicator is steady amber or flashing green
- The monitor is in Standby/Suspend mode
- ● ●
- Press any key on the keyboard or move the mouse to restore operation. Check the Power options settings on your computer.
- “Understanding power management” on page 26
- The power indicator is green, but there is no image.
- The power indicator is green, but there is no image.
- The video signal cable is loose or disconnected from the system or monitor.
- Be sure the video cable is connected with the system properly.
- “Connecting and turning on your monitor” on page 13
- The monitor brightness and contrast are at the lowest setting.
- The monitor brightness and contrast are at the lowest setting.
- Adjust the brightness and contrast setting on the OSD menu.
- “Adjusting your monitor image” on page 23
- One or more of the pixels appear discoloured
- One or more of the pixels appear discoloured
- This is a characteristic of the LCD technology and is not an LCD defect.
- If there are more than five pixels missing, contact the Customer Support Centre.
- Appendix A, “Service and Support,” on page A1
- ● Fuzzy lines in text or a blurry image. ● Horizontal or vertical lines through the image.
- ● Fuzzy lines in text or a blurry image. ● Horizontal or vertical lines through the image.
- ● Image setup has not been optimized ● Your system Display Properties setting have not been optimized.
- Adjust the resolution settings on your system to match the native resolution for this monitor: 1366x768 at 60 Hz.
- “Adjusting your monitor image” on page 23 “Manual image setup”
- Perform automatic image setup. If automatic image setup does not help, perform manual image setup.
- Perform automatic image setup. If automatic image setup does not help, perform manual image setup.
- “Selecting a supported display mode” on page 26
- When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system.
- When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system.
- See the Advanced section of your system’s display properties.
- The image is not acceptable when switching to dual mode
- The image is not acceptable when switching to dual mode
- It has not set the optimum resolution for each mode
- ● ●
- Use ThinkVision Duo software to optimize the dual screen operation Adjust graphic card resolution manually
- “Using the controls” on
- direct access page 23
- Problem
- Problem
- Problem
- Problem
- Problem
- Table3-2.Troubleshooting(continued)
- Manual image setup
- If automatic image setup does not establish the image that you prefer, perform manual image setup.
- Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.
- 1.Press
- Figure
- at the bottom of the monitor to open the OSD menu.
- 2.Use
- or
- to select
- and press
- to access.
- 3.Use
- or
- to select Clock and Phase adjustment.
- Figure
- Figure
- Figure
- Figure
- Figure
- ● Clock (pixel frequency) adjusts the number of pixels scanned by one Horizontal sweep. If the frequency is not correct, the screen shows vertical Stripes and the picture does not have the correct width. ● Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the picture has horizontal disturbances in light picture. 4.When the image no longer looks distorted, save the Clock and Phase adjustments.
- 5.Press
- Figure
- to leave the OSD menu.
- Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 8.1, Microsoft Windows 8, Microsoft Windows 7. Installing the monitor driver in Windows 8.1 To install the device driver in Microsoft® Windows 8.1, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows 8.1. 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the m
- Lenovo recommends using either 1366 x 768 at a refresh rate of 60 Hz, or 640 x 480 at refresh rate of 60 Hz. Installing the monitor driver in Windows 8 To use the Plug and Play feature in Microsoft Windows 8, do the following: Note: You must download file from the Reference and Driver CD to use the Plug and Play feature in Windows 8. 1.Turn off the computer and all attached devices. 2.Ensure that the monitor is connected correctly. 3.Turn on the monitor and then turn on the computer. Allow your computer to
- Installing the monitor driver in Windows 7 To use the Plug and Play feature in Microsoft Windows 7, do the following: Note: You must download file from the Reference and Driver CD to use the Plug and Play feature in Windows 7. 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then turn on the computer. Allow your computer to boot into Windows 7 operating system. 4. Open the Display Properties window by clicking Start, Control P
- Service information Product numbers The product number for your monitor is located on the side of the display bezel as shown below.
- E1922s
- Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications. The following are examples of misuse or abuse and not covered by warranty: ● Images burned on to the screen of a CRT monitor. Burned image is preventable by utilizing a moving screen saver or power management.
- Service parts The following parts are for use by Lenovo service, or Lenovo authorized dealers, To support the customer warranty. Parts are for service use only. The table below shows information for model 60BDAAR6WW. Table 3-3. List of service parts
- FRU (Field Replaceable Unit) Part number
- FRU (Field Replaceable Unit) Part number
- FRU (Field Replaceable Unit) Part number
- FRU (Field Replaceable Unit) Part number
- FRU (Field Replaceable Unit) Part number
- Appendix A Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of the product. Refer to your Lenovo Statement of Limited Warranty for a fully explanation of Lenovo warranty terms.
- Registering your option Register to receive product service and support updates, as well as free and discounted computer Accessories and content. Go to: http://www.lenovo.com/support
- Online technical support Online technical support is available during the life of your product through the Lenovo Support Web site at http://www.lenovo.com/ support. Product replacement assistance or exchange of defective components also is available during the warranty period, assistance for replacement or exchange of defective components is available. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. Your technical support representative ca
- Telephone technical support Installation and configuration support through the Customer Support Center will be withdrawn or made available for a fee, at Lenovo’s discretion, 90 days after the option has been withdrawn from marketing, Additional support offerings, including stepbystep installation assistance, are available for a nominal fee. To assist the technical support representative, have available as much of the following information as possible: ● Option name ● Option number ● Proof of purchase ● Com
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- or
- Region
- Telephone
- Number
- Africa
- Africa
- Africa: +44 South Africa:
- (0) 1475555055 +27113028888 and 0800110756
- TR
- Central Africa: Contact the nearest Lenovo
- TR
- Business Partner
- Argentina
- Argentina
- 08006660011
- (Spanish)
- Australia
- Australia
- 131426
- (English
- )
- Austria
- Austria
- Warrant
- service
- and
- support:
- 01211454610
- (German
- )
- Belgium
- Belgium
- Warrant
- service
- and
- support:
- 022253611
- (Dutch,
- French)
- Bolivia
- Bolivia
- 0800100189
- (
- Spanish)
- Brazil
- Brazil
- Sao Paulo region: (11) 38898986 Outside Sao Paulo region: 08007014815 (Brazilian Portuguese)
- Brunei
- Brunei
- 8011041
- (English
- ,
- Bahasa
- Melayu)
- Canada
- Canada
- Toronto:4163833344
- TR
- Outside Toronto: 18005653344
- TR
- (English , French)
- Chile
- Chile
- Toll Free: 188800442488
- TR
- 800361213
- TR
- (Spanish )
- China
- China
- 861058851110
- TR
- 8009908888
- TR
- (Mandarin)
- China (Hong
- China (Hong
- Kong
- S.A.R.)
- (852)30713561 (Cantonese, English,
- Mandarin)
- China
- China
- ThinkCentre Commercial PC: 7959892
- (Macau
- (Macau
- S.A.R.)
- Multimedia Home PC: 0800336 (Cantonese, English, Mandarin)
- Colombia
- Colombia
- 18009123021
- (Spanish)
- Costa
- Costa
- Rica
- 08000111029(
- Spanish
- )
- Croatia
- Croatia
- 08000426
- Cyprus
- Cyprus
- +35722841100
- Czech
- Czech
- Republic
- +420272131316
- Denmark
- Denmark
- Warranty
- service
- and
- support:
- 70105150
- (Danish)
- Dominican
- Dominican
- Republic
- 18664342080(Spanish
- )
- Ecuador
- Ecuador
- 1800426911(Spanish
- )
- Egypt
- Egypt
- +20235362525
- El
- El
- Salvador
- 8006264
- (Spanish)
- Estonia
- Estonia
- +372
- 6776793
- TR
- +372
- 66 00 800
- Finland
- Finland
- Warranty
- service
- and
- support:
- +35880014260(Finnish)
- France
- France
- Warranty Warranty (French)
- service service
- and and
- support support
- (hardware): 0810631213 (software): 0810631020
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- or
- Region
- Telephone
- Number
- Germany
- Germany
- Warranty
- service
- and
- support:
- 01805004618
- (German
- )
- Greece
- Greece
- +302106801700
- Guatemala
- Guatemala
- 18006240051
- (Spanish
- )
- Honduras
- Honduras
- Tegucigalpa: 2324222 San Pedro Sula: 552223
- 4
- TR
- (Spanish)
- Hungary
- Hungary
- +3613825716 +3613825720
- TR
- (English, Hungarian)
- India
- India
- 18004252666 +918025359182
- TR
- (English )
- Indonesia
- Indonesia
- 021 5238 823 Local number only: 001803606282 DID (Direct Inward Dialing): +603 8315 (English, Bahasa Indonesia)
- 6859
- Ireland
- Ireland
- Warranty
- service
- and
- support:
- 018811444
- (English)
- Israel
- Israel
- Givat Shmuel Service (Hebrew, English)
- and
- Center:
- +97235313900
- Italy
- Italy
- Warranty
- service
- and
- support:
- +39800820094
- (Italian)
- Japan
- Japan
- Toll Free: Internatio
- 0120205550 nal:+81462664716
- TR
- The above numbers will be answered with a Japanese language voice prompt. For telephone support in English, please wait for the Japanese voice prompt to end, and an operator will answer. Please say “English support please”, and your call will be transferred to an Englishspeaking operator. PC software: 0120558695
- TR
- Overseas calls: +81442008666(Japanese)
- Kazakhstan
- Kazakhstan
- Call
- center:
- +77273231427(Standard
- charges
- Apply)
- (Russian
- ,
- English)
- Kingdom
- Kingdom
- of
- Saudi
- Arabia
- 800
- 85
- 000
- 52
- (Standard
- Charges
- Apply)
- Korea
- Korea
- 15886782
- (Korea)
- Latvia
- Latvia
- +371
- 7070360
- Lithuania
- Lithuania
- +370
- 5
- 278
- 66
- 00
- Luxembourg
- Luxembourg
- +352360385343(French)
- Malaysia
- Malaysia
- Local number only: 1800881889 DID: +603 8315 6855
- TR
- (English, Bahasa Melayu)
- Malta
- Malta
- +35621445566
- Mexico
- Mexico
- 0018664342080(Spanish)
- Middle
- Middle
- East
- +44
- (0)1475555055
- Netherlands
- Netherlands
- +31205145770
- (Dutch)
- New
- New
- Zealand
- 0800733222
- (English
- )
- Nicaragua
- Nicaragua
- 0018002201830
- (Spanish)
- Norway
- Norway
- Warranty
- service
- and
- support:
- 81521550(Norwegian)
- Panama
- Panama
- Lenovo Customer 2066047(Spanish)
- Support
- Center:
- 0018664342080
- (Toll
- Free)
-
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- or
- Region
- Telephone
- Number
- Peru
- Peru
- 080050866
- (Spanish)
- Philippines
- Philippines
- 180016010033
- (English,
- Filipino)
- Poland
- Poland
- +48228786999
- (Polski)
- Portugal
- Portugal
- +351218927046
- (Portuguese)
- Romania
- Romania
- +40212244015
- Russia
- Russia
- Moscow: Toll Free:
- +7(495)2586300 +88002006300 (Russian)
- Singapore
- Singapore
- Local
- number
- only:
- 8006011343
- DID:
- +603
- 8315
- 6859
- (English)
- Slovakia
- Slovakia
- +421249545555
- Slovenia
- Slovenia
- +38612005060
- (Slovenian)
- Spain
- Spain
- 917147983,0901100000
- (Spanish)
- Sri
- Sri
- Lanka
- +9411
- 2493547
- +9411
- 2493548
- (English)
- Sweden
- Sweden
- Warranty
- service
- and
- support:
- 0771171040
- (Swedish)
- Switzerland
- Switzerland
- Warranty
- service
- and
- support:
- 0800555454
- (German,
- French,
- Italian)
- Taiwan
- Taiwan
- 886287239799,0800000700
- (Mandarin)
- Thailand
- Thailand
- Local number only: 1800060066 66 2273 4088
- TR
- DID: +603 8315 6857 (Thai, English)
- Turkey
- Turkey
- 02123360366 00800448825165
- (Turkish)
- Ukraine
- Ukraine
- 044
- 362
- 42
- 81
- (Standard
- Charges
- Apply)
- United
- United
- Arab
- Emirates
- 800035702810
- (Standard
- Charges
- Apply)
- United
- United
- Kingdom
- Standard
- warranty
- support:
- 08705500900
- (English)
- United
- United
- States
- 18004267378
- (English)
- Uruguay
- Uruguay
- 0004110056649
- (Spanish)
- Venezuela
- Venezuela
- 08001002011
- (Spanish)
- Vietnam
- Vietnam
- For Northern Area and Hanoi City: 844 3 946 2000 or 844 For Southern Area and Ho Chi Minh City: 848 3 829 5160 6457(Vietnamese, English)
- 3 942 6457 or 844 3 942
- Country
- Appendix B Notices
- Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instea
- Recycling information Lenovo encourage owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.com/lenovo/environment/recycling
- Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors are categorized as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government. In accordance with the Law for Promotion of Effective Utilization
- Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
- Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo ThinkCentre ThinkPad ThinkVision Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies. Other company, product, or service names may be trademarks or service marks of others.
- Turkish statement of compliance The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE).
- Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries, or both.
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- Country
- FRU (Field Replaceable Unit) Part number
- FRU (Field Replaceable Unit) Part number
- FRU (Field Replaceable Unit) Part number
- Problem
- Problem