Airlink101 AR670W - Manual (Page 2)

This Quick Installation Guide only provides the basic instructions. For more
detailed information, please refer to the User’s Manual on the supplied CD.
Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem,
and the router. You should setup the router with a wired connection first before attempting to
setup any wireless connections.
Step 1 Connect one end of the network cable to the WAN port of the router and connect the
other end of the cable to the DSL/Cable modem.
Step 2 With another network cable, connect one end of the cable to your computer’s network
card and connect the other end to one of the LAN (Ethernet) ports on the router.
Step 3 Power on the DSL/Cable modem and wait for the lights on the modem to settle
down.
Step 4 Power on the router by connecting one end of the supplied power adapter to the
power jack of the router and connecting the other end to an electrical outlet.
Step 5 Power on your computer.
Step 6 Make sure the WAN, Wireless, and the LAN ports that the computer is connected to
are lit. If not, try the above steps again.
Connecting the Router
Section 1
Section 1
AR670W Icon Illustrations:
Power
On: Power on
Status
Blinking: Function properly.
WAN
On: Link established / Blinking: Data transmission
Wireless
On: Wireless is ready / Blinking: Data transmission LAN
On: Link established / Blinking: Data transmission
WPS (WiFi Protected Setup)
Blinking Green: WPS setting in progression
Static Green: WPS successfully set up
Blinking Red: Error found