Olympus DS-2000 - Manual (Page 29)

29
Index Marks
Index Marks
Setting an Index Mark
1 Press the INDEX button during
recording or playback to set an
index mark.
An index mark is set and the index number
appears on the display.
Clearing an Index Mark
1 Play the file with the index mark
you want to clear.
2 Press the FF/+ or REW/– button to
choose the index mark to be
cleared.
3 Press the ERASE button while the
index number appears for about 2
seconds on the display.
The index mark is erased.
Index numbers are reassigned automatically.
................................................................................................
Notes
• Up to 16 index marks can be set in a file. Attempting to set more index
marks will cause “INDEX FULL” to appear on the display.
• Index marks cannot be set or cleared in a file stored on a SmartMedia
card with a write-protect seal attached to it (
☞ P.7).
• Index marks cannot be set or cleared in a locked file (
☞ P.30, 31).
Index marks can be incorporated into a file during recording or playback to make it easy to locate
interesting information. Index marks enable faster access to important information by pressing the
FF/+ or REW/– button.
INDEX
STOP
ERASE
1
MENU
REC
INDEX
STOP
ERASE
1
2
3
MENU
REC