Olympus WS-210S - Manual (Page 13)

- 13 - - 13 -
Notes
sNEVER disconnect the USB while the record/play indicator light and USB access
indicator light are flashing in red. If you do so, the data may be destroyed.
sBe sure to push the USB connector all the way in. Otherwise, the recorder may not
operate properly.
sRefer to the user's manual for your PC regarding the USB port or USB hub on your
PC.
sUse the supplied USB extension cable depending on situations.
sData can be written or uploaded to the recorder even though the attribute of the
recorder drive is shown as Read-only by the operating system of the PC.
sAs the noise may cause adverse effects on electronics devices nearby the recorder,
unplug the earphone when you connect the recorder to a PC.
PC: Windows IBM PC/AT compatible PC
Macintosh Power Mac G3 233 MHz class processor or faster
iMac/ iBook/ eMac/ Power Mac/ PowerBook
Operating
System:
Windows Microsoft Windows 2000/XP/Vista
Macintosh Mac OS X 10.2 or more
USB port: One free port
Using the recorder on your PC
The support service will not cover if your PC has been updated from Windows 95 or 98
to Windows 2000/XP/Vista. Any failure on a self-modified PC will not be covered under
the operational warranty.
General Precautions
Read this manual carefully to ensure that you know how to operate it safely and
correctly. Keep this manual in an easily accessible location for future reference.
• The warning symbols indicate important safety related information. To protect your-
self and others from personal injury or damage to property, it is essential that you
always read the warnings and information provided.
Warning regarding data loss
Recorded content in memory may be destroyed or erased by operating mistakes, unit
malfunction, or during repair work. For important recorded content, we recommend
you to write it down somewhere or make a back-up by downloading to a PC.
Troubleshooting
Q1 Nothing happens when a button is pressed.
A1 • The HOLD switch may be set to HOLD.
• The battery may be depleted.
• The battery may be inserted incorrectly.
Q2 No sound or quiet sound is heard from the speaker while playing back.
A2 • The earphone plug may be plugged into the recorder.
• The volume may be set to the minimum level.
Q3 Recording is not possible.
A3 By pressing the
5
button repeatedly while the recorder stops, check if the
display shows:
• The remaining recording time in the selected folder may have reached
“00:00”.
• The number of files is 200.
Check if the display shows “Memory FULL” by pressing the
4
button.
Q4 The playback speed is too fast (slow).
A4 The recorder may be set to Fast (slow) Speed Playback.