Olympus C-720 Ultra Zoom - Manual (Page 73)

72
Chapter 5
Sequential shooting (Cont.)
Under some conditions, you may obtain better results shooting with exposure
compensation than by using the exposure setting considered optimal by the
camera. When Auto bracketing is set, exposure is changed automatically for
each frame when you start shooting. The exposure differential can be
selected in the menus. Focus and white balance are locked at the first frame.
Ex: When BKT is set to ±1.0, x3
2 Take pictures.
● Press the shutter button all the way and keep it pressed. The camera will
take pictures in sequence until you release the button.
● Sequential shooting speed (HQ mode): approximately 1.2 frames/sec.,
number of pictures: 5 max.
● Also read the “Note” (P. 74) and “Modes & Drive mode” (P. 73).
Note
Auto bracketing — Shooting pictures sequentially
with a different exposure for each frame
Mode dial
setting
1 In the top menu, select MODE MENU T CAMERA T BKT. Press
í
.
~
“How to use the menu” (P. 38)
2 Press
Ññ
to select the exposure
differential between each frame (±0.3,
±0.7, ±1.0), then press
í
.
BKT BKT
CANCEL SELECT GO
0.7
0.3 x3
x5
1.0