Olympus VN-8700PC - Manual (Page 12)

12
- -
2 Press the 9 or 0 button adjust the start/stop
actuation level.
• The VCVA level can be set to any of 15 different values.
• The higher the value, the more sensitive the recorder to sounds.
At the highest value, even the faintest sound will activate
recording.
Notes:
• The start/stop actuation level also varies depending on the selected
microphone sensitivity mode.
• If the starting level is not adjusted within 2 seconds, the display will return to the previous.
• To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is
recommended.
• If the [Rec Scene] is set to a setting other than [Off], the [VCVA] function will not be available.
Set [Rec Scene] to [Off] to use this function.
h Play Menu
Rec Scene
The recording setting can be selected from the [Memo], [Meeting],
[Conference] templates to suit the recording scene or situation. You can
also save a recording setting of your choice.
1 Select [Rec Scene] from the menu on the
[Rec Menu].
2 Press the + or − button to select the item to set, and
then press the
`OK/MENU or 9 button.
In Menu mode selection:
When [Scene Select] is selected:
Press the + or – button to select the recording scene you want to set,
and then press
`OK/MENU button.
[Off]: Disables this function.
[Memo]: Suitable for dictation.
[Meeting]: Suitable for recording meetings.
[Conference]: Suitable for seminars with a small number of
people.
[User Setting]: Recording with menu settings saved using
[Scene Save].
a Rec Scene indicator
When [Scene Save] is selected:
Press
`OK/MENU button.
• You can save the current [Rec Menu] menu settings in [User
Setting].
• To change the [Rec Scene], return the screen to [Scene Select] by
pressing and holding the FOLDER/INDEX/SCENE button for 1 second
or longer while the recorder is during stop mode.
Note:
• If the [Rec Scene] is set to a setting other than [Off], the menu settings for the recording functions
will not be available.Set the [Rec Scene] to [Off] to use these functions.
a
Voice Filter (For VN-8700PC/VN-8600PC only)
The recorder has a Voice Filter Function to cut low and high frequency
tones during normal, fast, or slow playback, and enable clear audio
playback.
1 Select [Voice Filter] from the menu on the
[Play Menu].
In Menu mode selection:
[On]: Enables the Voice Filter function.
[Off]: Disables this function.
a Voice Filter indicator
a
Play Mode
You can select the playback mode that fits your preference.
1 Select [Play Mode] from the menu on the
[Play Menu].
In Menu mode selection:
When [Play Area] is selected:
[File]: Stop after playing back the current file.
[Folder]: Play files continuously in the current folder until the last
file and stop.
When [Repeat] is selected:
[Repeat]: Sets to repeat playback mode.
[Off]:
Disables this function.
a Playback mode indicator
a