Olympus VN-405PC - Manual (Page 35)

35
4
EN
Menu setting method
M
e
nu
set
ting
m
e
th
od
3 Press the + button to select
[Start], and press the
`OK
button.
Format
If you format the recorder, all files will be
removed and all function settings will return
to defaults except date and time settings.
Transfer any important files to a computer
before formatting the recorder.
1 Select [Format] from the menu
on the [Device Menu].
For VN-405PC:
Proceed to the operation of step 3.
2 Press the + or − button to select
the recording media to format,
and press the
`OK button.
• After [All data will be erased]
message is on for two seconds, [Start]
and [Cancel] will turn on.
Notes
• Never format the recorder from a PC.
• When the recorder is formatted, all the
saved data, including locked files and
read-only files, are erased.
• Replace the battery with a new one in
order to ensure that the battery will not
run out while processing. In addition, it
may take over 10 seconds to complete
processing. Never perform operations
such as the following while processing, as
they may damage the data.
1 Removing the battery while
processing.
2 Remove the microSD card during
processing when [microSD card] is
being used as the recording media
(VN-406PC only).
For VN-406PC:
• When a microSD card is inserted in the
recorder, be sure to confirm the recording
media as either [Internal memory]
or [microSD card] so that there is no
mistake (
☞ P.34).
4 Press the + button again to
select [Start], and press the
`OK
button.
• Formatting begins and [Formatting!]
flashes on the display.
• [Format done] appears when
formatting ends.