Olympus DS-5000 - Manual (Page 50)

50
3
Index Marks
Index marks can be placed in a file during
recording or playback. Index marks are used
to provide a quick and easy way to identify
important or significant parts within the file.
Setting an Index Mark
1 Press the F3(INDEX) button during
recording or playback to set an index
mark.
An index number appears on the display.
Locating an Index Mark
2 Hold the 9 or 0 button while
playing a file.
The recorder stops for 1 second when it reaches
the index mark.
Clearing an Index Mark
3 Locate the index mark you want to clear.
4 Press the ERASE button while the index
number appears for approximately 2
seconds on the display.
The index mark is erased.
Inde
x Marks
F3 button
9, 0
button
ERASE button
029
/ 030
INSERT SPEED INDEX
MIKE
QP DICT
3
H
10
M
56
s
22 M 40 s
Index 01 Set
029
/ 030
MIKE
QP DICT
3
H
10
M
56
s
22 M 40 s
Index 01 Clear
029
/ 030
INDEX
MIKE
QP DICT
3
H
10
M
56
s
22 M 40 s
Index 01
Notes
• Up to 32 indexmark can be set in a file.
• When a file is locked or set to read-only, or when the
SD card lock is enabled Indexmark Comment cannot
be erased. Clear the settings before erasing.
• When the recorder has been set to Classic DSS mode,
index marks are limited to a maximum of 16 for each
file.