Recording – Olympus LS-10 User Manual

Page 21

Advertising
background image

21

Abou
t Recor

ding

2

Recording

e

d

5

Press the

STOP 4 button to stop

recording.

• [

] will go out on the display.

e File length

Actually producing the sound you

would like to record:

• When a loud sound is produced the level

meter will swing all the way over to the right

while recording and the red [PEAK] indica-

tor lamp will turn on. When this happens

the sound will be recorded in a distorted

manner since the recording level is too

high.

When the level meter
is maxed out (the
recorded sounds will
be distorted)

Example of conditions
where the recording
level has been lowered
and the excess input
has been adjusted

• When a loud noise is produced, adjust

the recording level so that the level meter

remains in the vicinity of [–6].

• When the adjustments have been com-

pleted, press the REC

s button and perform

a test recording.

4

Press the

REC s button again will

begin recording.

• [

] will appear on the display.

d Elapsed recording time

Notes

• When an SD Card is inserted in the recorder,

be sure to confirm the recording media as either

the [Built-in Memory] or the [SD Card] so that

there is no mistake (

☞ P.34, P.39).

• When attempting to perform operations such as

rewriting the contents of an SD Card in cases

where the card has been write protected, [SD

Card Locked] will appear. The playback opera-

tion can be performed, but the write protection

must first be turned off when overwriting the

contents on the card (

☞ P.15).

• If you select a folder other than A through

E and press the REC

s button, an [Illegal

Folder] message will flash. Select a folder from

A through E and start recording again.

• When remaining recording time is less than

60 seconds, the [PEAK] indicator light starts

flashing in amber. When the recording time

is decreasing to 30 or 10 seconds, the light

flashes faster.

• [Folder Full] will appear when the folder capac-

ity is full. Delete any unnecessary files before

recording any further

(

☞ P.32).

• [Memory Full] will appear when the memory

is full. Change the recordable media or delete

any unnecessary files before recording any

further (

☞ P.32, P.34, P.39).

• When the recording button of the exclusive

remote control RS30W (optional) is pressed

once, recording will start immediately.

Advertising