03 basic setup, Before setting up (vsx-s310 only), U.k.) – Pioneer VSX-S510-S User Manual
Page 23: Automatically setting up for surround sound, Mcacc), Setup, Basic setup
3
Chapter
3
23
Basic Setup
Before setting up (VSX-S310 only)
This receiver allows you to adjust the system setup, using the
on-screen display (OSD) that is shown on the TV screen.
•
Use composite connections for system setup.
•
For connecting this receiver with the TV, please refer see
.
First, follow the procedure below to make sure that the OSD
screen is displayed.
1
Switch on the receiver and your TV.
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding
composite video cable.
For example, if you connected this receiver to the VIDEO
jacks on your TV, make sure that the VIDEO input is now
selected.
3
Press
on the remote control, then press the
HOME MENU
button.
The Home Menu of the OSD screen will be displayed on
the TV.
Canceling the Auto Power Down (for Europe,
Russia and U.K.)
When this receiver is not used over the specified period, it will
power down automatically. The automatic power-off timer is
set to 15 min. on the VSX-S510, 6 hours on the VSX-S310 under
factory settings, and the timing can be changed or the power-
off function switched off altogether. For details, see
.
Automatically setting up for surround sound
(MCACC)
The Auto Multi-Channel ACoustic Calibration (MCACC) setup
measures the acoustic characteristics of your listening area,
taking into account ambient noise, speaker size and distance,
and tests for both channel delay and channel level. After you
have set up the microphone provided with your system, the
receiver uses the information from a series of test tones to
optimize the speaker settings and equalization for your
particular room.
CAUTION
•
The test tones used in the Auto MCACC setup are output at
high volume.
Important
•
The Auto MCACC setup will overwrite any existing speaker
settings you’ve made.
•
Before using the Auto MCACC setup, the NETRADIO,
M.SERVER
, FAVORITE, iPod/USB or ADAPTER input
should not be selected as an input source.
1
Switch on the receiver and your TV.
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding HDMI
cable (VSX-S510 only).
3
Connect the microphone to the MCACC SETUP MIC jack
on the front panel.
Make sure there are no obstacles between the speakers
and the microphone.
If you have a tripod, use it to place the microphone so that
it’s about ear level at your normal listening position.
Otherwise, place the microphone at ear level using a
table or a chair.
4
Press BD button on the remote control to switch to BD
entry.
5
Press
on the remote control, then press the
HOME MENU
button.
The Home Menu appears on your TV. Use
///
and
ENTER
on the remote control to navigate through the
screens and select menu items. Press
RETURN
to exit
the current menu.
RECEIVER
Tripod
Microphone
RECEIVER