Pioneer RMX-1000-M - Manual (Page 22)

MIDI assignment map
! “CC” is the abbreviation of “control change”. A control change is a type of MIDI signal used to transmit various types of control information, such as
timbre, volume, etc.
! “Note” is a MIDI term used when pressing or releasing notes on a piano or other keyboard.
On this unit, values from 0 to 127 are output as CCs when controls or the [X-PAD] are operated. Also, when buttons or switches are operated, val-
ues from 0 to 127 are output as Notes.
Category SW Name SW Type MIDI Messages
MIDI button type
Trigger/Toggle
Notes
LEVEL OUTPUT LEVEL control VR CC 000 — 0-127
BPM/QUANTIZE
QUANTIZE button BTN Note 000 1 OFF=0, ON=127
AUTO button BTN Note 001 1 OFF=0, ON=127
TAP button BTN Note 002 Trigger only OFF=0, ON=127
NUDGE(–) button BTN Note 003 Trigger only OFF=0, ON=127
NUDGE(+) button BTN Note 004 Trigger only OFF=0, ON=127
FX SOURCE
INPUT button BTN Note 005 1 OFF=0, ON=127
X-PAD button BTN Note 006 1 OFF=0, ON=127
ISOLATE FX
LOW control VR CC 001 — 0-127
MID control VR CC 002 — 0-127
HI control VR CC 003 — 0-127
ISOLATOR button BTN Note 007 1 OFF=0, ON=127
CUT/ADD button BTN Note 008 1 OFF=0, ON=127
TRANS/ROLL button BTN Note 009 1 OFF=0, ON=127
GATE/DRIVE button BTN Note 010 1 OFF=0, ON=127
X-PAD FX
BANK button BTN Note 011 Trigger only OFF=0, ON=127
ROLL button BTN Note 012 Trigger only OFF=0, ON=127
KICK button BTN Note 013 Trigger only OFF=0, ON=127
SNARE button BTN Note 014 Trigger only OFF=0, ON=127
CLAP button BTN Note 015 Trigger only OFF=0, ON=127
HI HAT button BTN Note 016 Trigger only OFF=0, ON=127
OVERDUB (DELETE) button BTN Note 017 Toggle only OFF=0, ON=127
HOLD (MUTE) button BTN Note 018 Toggle only OFF=0, ON=127
X-PAD LEVEL control VR CC 004 — 0-127
PITCH control VR CC 005 — 0-127
X-PAD (position) VR CC 006 —
0-127
Sends the [X-PAD]
position information.
X-PAD (touch) BTN Note 019 Trigger only
OFF (when not touched)
= 0, ON (when
touched) =127
SCENE FX
SCENE FX control VR CC 007 — 0-127
SUB PARAMETER 1 control VR CC 008 — 0-127
SUB PARAMETER 2 control VR CC 009 — 0-127
BPF ECHO button BTN Note 020 1 OFF=0, ON=127
ECHO button BTN Note 021 1 OFF=0, ON=127
NOISE button BTN Note 022 1 OFF=0, ON=127
SPIRAL UP button BTN Note 023 1 OFF=0, ON=127
REVERB UP button BTN Note 024 1 OFF=0, ON=127
HPF ECHO button BTN Note 025 1 OFF=0, ON=127
LPF ECHO button BTN Note 026 1 OFF=0, ON=127
CRUSH ECHO button BTN Note 027 1 OFF=0, ON=127
SPIRAL DOWN button BTN Note 028 1 OFF=0, ON=127
REVERB DOWN button BTN Note 029 1 OFF=0, ON=127
RELEASE FX
RELEASE FX selector switch 1 (VINYL
BRAKE)
SW Note 030 Trigger only 1 OFF=0, ON=127
RELEASE FX selector switch 2 (ECHO) SW Note 031 Trigger only 1 OFF=0, ON=127
RELEASE FX selector switch 3 (BACK
SPIN)
SW Note 032 Trigger only 1 OFF=0, ON=127
RELEASE FX lever VR CC 010 — 0-127
FX SETTING
SETTING selector switch 1 (DEFAULT) SW Note 033 Trigger only 1 OFF=0, ON=127
SETTING selector switch 2 (USER) SW Note 034 Trigger only 1 OFF=0, ON=127
22 En