L.B. White Bertha and Torchman Torches - Manual (Page 7)

Specifications and Part Numbers
Heat To rch Head Manual Hose P.O.L.
Model Output and Handle Orifice Handle Valve Hose Adapter Coupling Fitting
420-06383
169 Tu bular Steel
3 in. OD x 6 in.*
420-06164
171 Tu bular Steel
3 in. OD x 6 in.*
7
Tank
Pressure
LP Vapor
200,000
BTUH
500,000
BTUH
410-05161
14 in.
310-
05166
310-
05168
130-20229
550-
20703
1/4 in.
OD x
10 ft.
130-02954 310-01098
Operating
Pressure/Fuel
* To rch head dimension only. Handle welded to head is 14 in. length.
130-05170
1. Connect nipple into handle of torch. Tighten
securely.
2. Connect manual valve to nipple. Note gas flow
arrow on valve body. Tighten securely.
3. Connect hose adapter to inlet of manual valve.
Tighten securely.
4. Connect hose to adapters at needle valve and
regulator outlet. Tighten securely.
TORCH HEAD
ORIFICE
HANDLE
NIPPLE
VALVE,
MANUAL
ADAPTER
ADAPTER
REGULATOR
HOSE
Models 166 (BIG BERTHA) and 168 (LITTLE BERTHA)
Specifications and Part Numbers
Heat To rch Head Manual Hose
Model Output with Orifice Orifice Handle Nipple Valve Adapter Hose Regulator
320-02856
166 Cast Iro n
2 3/8 in. OD x 8 in.
320-02854
168 Cast Iro n
2 in. OD x 7 in.
25 PSIG
LP Vapor
330-05169
11 in.
310-
01016
310-
10132
500,000
BTUH
200,000
BTUH
130-20229 130-01142
550-20703
1/4 in. OD
x 10 ft.
310-01098
Operating
Pressure/Fuel
550-21788
25 PSI