Hyline Offroad JK TUBE STEP ROCKER PANELS (4 DOOR MODELS) User Manual
Proudly made in, Parts list, Tools needed
Q:\Hyline Offroad, LLC\Installation Instructions\400.300.100-JK TUBE STEP ROCKER 4 DOOR\400.300.100 Installation Instructions.doc
Page 1 of 4
REV 1 04/16/13
Proudly Made In
USA
Installation Instructions:
JK Tube Step Rocker Panel
Part Number: 400.300.100
Vehicle Fitment:
2007-Present Jeep Wrangler
4-Door Only
Parts List
Qty:
1 Driver Rock Slider – RED Dot
1 Passenger Rock Slider – GREEN Dot
1 Driver Drill Template – RED Dot
1 Passenger Drill Template – GREEN Dot
2 M12 Bolts
2 M12 Flat Washers
2 M12 Lock Washers
12 3/8-16 Gr 5 Hex Nuts
12 3/8” USS Flat Washers Gr 5
12 3/8” Split Lock Washers Gr 5
6 3/8-16 Threaded U-Bolts
1 7/16-20 Hex Head Bolt Gr. 5 with Flat &
Lock Washer
4 Square Plastic End Caps
12 3/8” Retaining Rings
Tools Needed
Ratchet & Sockets
5/8”, 9/16” 18mm &
19mm
Drill
3/16”, 1/2” & 25/64”
Multi-Depth or Step
Drill Bit Preferred
Hand Tap & 7/16”-20
Tap
Congratulations on your purchase of the Hyline Offroad Tube Step Rocker Panels. All of our products
are completely manufactured in our facility located in Perkasie, PA. They are designed and
engineered by Offroad enthusiasts just like you to be rock solid. Hyline Offroad would like to thank
you for your recent purchase and look forward to serving you in the future.
Hyline Offroad Staff
Safety Glasses