JB Conversions 16-1207 HD Super Short SYE Kit for the NP241C - Manual (Page 14)

14
24) Apply a thin bead of RTV sealant to the rear case half and install
the rear case/pump assembly (Fig.27).
FIG: 27
25) Install the 10mm bolts to hold the two case halves together.
26) Visually verify that the pump pickup tube is in place and has not
become disconnected from the pump housing.
27) Install the 40 tooth tone wheel oriented as shown. Do not install
this wheel inverted (Fig.28).
FIG: 28