Humanscale Element Vision Hang Tag - Manual (Page 5)

Occupancy Sensor Instructions
Element Vision is equipped with a passive infrared (PIR)
occupancy sensor that automatically turns the light on
when it detects motion, and off (after 10 minutes) when
it doesn’t.
Press the power button once to turn on the light. A lit
power button indicates that the occupancy sensor is on.
To disable the occupancy sensor, press and hold the
power button for approximately five seconds until the
power button light flashes three times. An unlit power
button indicates that the occupancy sensor is disabled.
To reactivate the occupancy sensor, press the power
button for approximately five seconds until it is lit.
Use a soft cloth to clean or dust the lamp.
For heavy dirt or residue, use a soft cloth lightly
dampened with soap and water or another mild cleanser.
Warning: Do not use alcohol, abrasives or harsh solvents.
Cleaning Instructions