Humanscale QuickStand - Manual (Page 8)

8
STEP 12
Removing Brace Box
• Remove tape and lift out box. (fig. Q)
STEP 13
Adjusting Weight Capacity
WARNING: Do not use a Power Drill to adjust the tension adjuster
Tools: 6 mm Hex Key
• Remove top cover from QuickStand unit to expose
the tension adjuster screw (fig. R)
• Slowly begin to turn the tension adjuster
screw clockwise to increase the tension (fig. S)
• We recommend turning the tension adjuster
screw 10 revolutions at a time before checking to
see if your QuickStand is correctly balanced
• Once you have adjusted your QuickStand, try raising and
lowering a few times until it fluidly adjusts. Your QuickStand
should stay where you set it
• If you need to make further adjustments,
please follow these steps again
ADJUSTING QUICKSTAND
In order to be able to raise and lower your QuickStand with ease, it is important to spend some time adjusting the tension adjuster which
can be located in the top of the QuickStand unit
Increase Weight Capacity – If the platform is too heavy
to raise but easy to lower and does not stay in place when
raised, please adjust the tension adjuster
Decrease Weight Capacity – If the platform is too easy
to raise but difficult to lower and does not stay in place
when lowered, please adjust the tension adjuster
+
–
Q
R
S