INCRA Miter 1000 - Manual

Taylor Design Group, Inc.
warrants this product for one
year from date of purchase. We
will repair any defects due to
faulty material or workmanship,
or at our option, replace the
product free of charge. Please
return the failing component
only, postage prepaid, along
with a description of the
problem to the address below.
This warranty does not apply to
parts which have been
subjected to improper use,
alteration, or abuse.
OWNER’S MANUAL
Warranty
Please read this owner’s
manual before use and keep
it at hand for reference.
Safety
Important safety instructions for using the INCRA Miter1000
■ Before using the Incra Miter 1000, read and follow all of the instructions and
safety information in this owner's manual.
■ When using the Incra Miter 1000 in conjunction with any other tool, first read
and follow all instructions and safety information in that tool's owner's manual.
■ Never let the saw blade come in contact with the aluminum or steel
components of the INCRA Miter
1000.
■ When using the INCRA Miter 1000, always keep your hands clear of the saw
blade and the line of cut.
■ Always turn off the power and make sure that the saw blade comes to a
complete stop before changing the setting of any part of the INCRA Miter
1000.
■ Always securely tighten the large black clamping knob before starting any cut.
■ Wear safety glasses, hearing protection, and follow all normal shop safety
practices
■ After making any adjustments to the miter angle or fence position of your
INCRA Miter
1000, always verify safe clearance between the blade and fence
before turning on the saw
■ After making any adjustments to the fence position on the INCRA Miter 1000,
always make sure that the two socket head screws are securely tightened
■ When using the sliding stop to position a piece for a cut, always hold or
otherwise clamp the board between the stop and the blade.
®