IPitomy IPR20 Quick User Guide - Manual (Page 2)

Page 2 of 4
Copyright 2009 © IPitomy Communications, LLC
7. Click Save SIP Settings
8. Restart the IPr20 by clicking the Reset button
Configuring Users
1. Prior to this step, you will need to create the extensions to be used in the PBX. See the
PBX user manual for steps on extension creation
2. Login to the IPr20
3. Navigate to SIP=>User 1 to configure the extension that will be assigned to the Line 1
port on the IPr20, or User 2 for the extension that will be assigned to the Line 2 port
4. For the Primary Server, enter the extension number for the following fields: Phone
Number, CallerID Name, and User Name
5. For the Primary Server, the Password to be entered is the SIP password for the
extension being used (found by editing the extension and clicking Advanced)
6. Port should be 5060
7. Under Supplementary Service Subscription, uncheck Enable Call Waiting
8. Leave the rest of the settings at their defaults for now