Labnet Z206A High Capacity, Compact Research Centrifuge - Manual (Page 12)

Page 12 of 24 INSTRUCTION MANUAL Z 206 A © HERMLE Labortechnik GmbH
2 OPERATION
Hold the rotor with one hand and secure the rotor to the shaft by turning the fixing screw (1)
clockwise. (see photo 6).
photo 6
ATTENTION:
For safety always ensure that rotor fixing screw is tightened before each run. (see photo 6)
It is allowed to operate a 12-place-rotor with 2 or 4 loaded tubes only.
But the loaded borings must be opposite each other.
Photo 7: incorrect
Photo 8: correct
1