Titus FlowBar IOM - Manual (Page 14)

14 Installation Manual - FlowBar
FlowBar IOM
Redefine your comfort zone. ™ | www.titus-hvac.com
FlowBar Parts List
Last edited by: TVDR
Last edited: 4-26-99
FlowBar UHC
Last edited by: TVDR
Last edited: 06-23-99
[FlowBar USHiso]
(742a)
Last edited: 6-6-95
Last edited by:
(797)
Last edited: 5-30-95
Last edited by:
(743a)
Last edited: 6-2-95
Last edited by:
(745a)
Last edited: 6-2-95
Last edited by:
Last edited: 10-3-94
(746a)
Last edited by:
Last edited by: Tony VDR
Last edited: 11-22-99
(748a)
Model: UHC-10, -15 or -20 Description: Upper Hanger Clip
Application: Use with One-Slot models FL-10, -15 or -20 any border type, except Border Type 77. Clip inserts into
extrusion boss and hanger wire threads through hole in clip to support FlowBar Diffuser.
Quantity per Bag: 5 pieces
Model: USH Description: Upper Support Hanger
Application: Use with any One-Slot or Two-Slot Diffuser with any border type, except Border Type 77. Insert a clip
into the extrusion boss on each side of the diffuser. Thread hanger wire through hole to support FlowBar Diffuser.
Quantity per Bag: 15 pieces
Model: H1
Application: Use with Frame 3 or Frame 6 in hard ceiling installation. Insert a clip into the extrusion boss on the
outside of the Diffuser frame. Attach clip to Framing Member with flat head screw. Clips should be spaced at 10”
intervals.
Description: Hard Ceiling Clip
Quantity per Bag: 48 pieces
Model: H2 Description: Hard Ceiling Clip
Application: Use with Frame 1 in hard ceiling installation. Insert a clip into the extrusion boss on the outside
of the Diffuser frame. Attach the clip to Framing Member with flat head screw. Clips should be spaced at 10”
intervals.
Quantity per Bag:
48 pieces
Model: H3 Description: Hard Ceiling Clip
Application: Use with Frame 2, Frame 4 or Frame 5 in hard ceiling installation. Insert a clip into the extrusion boss
on the outside of the Diffuser frame. Attach clip to Framing Member with flat head screw. Clips should be spaced
at 10” intervals.
Quantity per Bag:
48 pieces
Model: H4 Description: Hard Ceiling Clip
Application: Use with Frame 4 in hard ceiling installation. Insert a clip into the extrusion boss on the outside
of the Diffuser frame. Attach clip to Framing Member with flat head screw. Clips should be spaced at 10”
intervals.
Quantity per Bag:
48 pieces
Model: WC1 Description: Wall Clip
Application: Use with Frame 3 to install Diffuser flush against side wall. Insert a clip into the extrusion boss on
the outside of the Diffuser frame. Attach clip to Framing Member with flat head screw. Clips should be spaced at
10” intervals.
Quantity per Bag:
28 pieces
Model: WC2 Description: Wall Clip
Application: Use with Frame 1, Frame 3 or Frame 6 to install Diffuser with reveal against side wall. Insert a clip
into the extrusion boss on the outside of the Diffuser frame. Attach clip to Framing Member with flat head screw.
Clips should be spaced at 10” intervals.
Quantity per Bag:
28 pieces