Vicor PI2127-EVAL1 60V/12A Full-Function High Side Active ORing Evaluation Board - Manual (Page 7)

Picor Corporation • picorpower.com PI2127-EVAL1 User Guide Rev. 1.0 Page 7 of 9
Figure 4: Plot of PI2127 response time to reverse current detection
Thermal Imaging:
Figure 5 PI2127 mounted on PI2127-EVAL1, Iout=12A,
T
A
=25°C, Air Flow=0LFM
Figure 6: PI2127 mounted on PI2127-EVAL1, Iout=12A,
T
A
=25°C, Air Flow=200LFM
PI2127
MOSFET MOSFET
Test Setup:
DUT: PI2127-EVAL1
Vin1+ = 48V
Vin2+ = 48V
Output Load = 5A
Test:
Both input sources are turned
on and sharing the load
current, then applied a short
with a screw driver between
Vin1+ and Vin1-.
Test purpose:
To show the PI2127 response
to a fault condition, where the
output of the input source is
shorted or tried to source
current from the load (Vout).
PI2127