Victorio VKP250 Food Strainer - Manual (Page 16)

Motor Use Instructions
Make sure you have read the Important Safety Instructions on
p. 12 before installing the motor.
Installation Steps:
1. Remove the motor from the packaging and make sure the power
switch is in the off (“O”) position (see diagram on p. 13) and the
motor is unplugged.
2. Use the crank handle to position the strainer shaft so the motor shaft
can fit in (see diagram below).
3. Once the shaft is positioned correctly, insert the motor shaft into the
food strainer shaft by pushing forward on the motor.
4. With the shafts connected, twist the motor counter-clockwise (see
diagrams below).
Strainer notches
should line up
with motor drive
shaft key.
14
Twist Counter
Clockwise