AJA Ki Pro User Manual
Page 37
Advertising
Ki Pro v3.2
www.aja.com
37
Figure 18. Configuring Ki Pro with a Static IP Address
NOTE:
For parameters 50.2, 50.3, and 50.4, you will be setting IP addresses that consist of “octets”
separated by a period (i.e., 10.0.180.0). The Select button selects the octet and then the Adjust
buttons select the desired number. Pressing Select again advances to the next octet. At the
final octet, the address will flash—pressing Select at that point confirms the setting.
Advertising