DgFlick Event Xpress - Manual (Page 16)

User Manual 1.0
Page 16 of 66
 From ‘Path’ option, you can change the path in which you want to save the project.
Number of Photos in Design
You can add more than one photo in the design. The photo addition, settings and editing of photos can be done in
‘Photo’ section only. This section guides you about photo tools available in ‘Add Event’ window.
 From ‘Photo1’ option you can change the settings of the photo to be included in the designs. From ‘Browse’ button
located next to the ‘Photo1’ option, you can browse through the folders and give the path of the photo folder.
 If your photo is Chroma, you can choose the ‘Chroma’ option. By clicking on the color box next to ‘Chroma’ option you
can directly go to the ‘Chroma’ window where you can give chroma effect to the photo.
 When you change the path for photo folder, the first photo in folder gets into the design.
Note: if you are choosing two photos for design, then at the time of selecting designs, make sure you choose designs of two
photos. Otherwise the second photo may not be included in final output.
Selecting Camera Position
The position of camera you maintained throughout the photography session should be selected here. This section
guides on how to choose camera position correctly.
 You can decide the angles of the camera from ‘Camera’ option. Three options are given from which you can choose
any one angle according to your photo angle. The angle which you have maintained at the time of clicking the
photographs should be selected here. All the photos in the folder will get set in the design according to your settings.
 The first angle is ‘Rotate CW 90’: If you select this option, the photos will get rotated clockwise by 90 0.
 The second option is ‘Default’: This will set the photos as they are clicked.
 Third option is ‘Rotate CW 270’: If you select this option, your photos will be rotated in 270 0 .
Select Designs for Event
Selection of designs is a major task while doing event photography. This section guides you for how to select designs,
edit them as per your need and set them for final output.
 From ‘Design’ section , you can add, edit or delete the designs to the event in which you want to export your
output. There are three options in ‘Design’ tab. ‘Add’, ‘Edit’ and ‘Delete’. From ‘Add’ button you can add designs to the
event. When you click on ‘Add’ button you are redirected to the ‘Select Designs’ window where you can see various
designs. You can select the designs for your event. Once you select the designs, you can add designs to the project by
clicking on ‘Next’ button. You will be redirected to the ‘Edit Event’ window where you will see that the designs chosen
by you are added to the ‘Design’ tab.
 If you want to edit any design for this event, then select he design which you want to edit and click ‘Edit’ button. You
will be redirected to the ‘Edit Design’ window. In this window, you can edit attributes according to your Preference.
From the ‘Edit Design’ window, you can add logo to the design and place it on the page according to your preference.
Once you finish with editing, you can save the changes with ‘Save’ button.
 If you don’t want to add any selected design to the event, delete that design from the ‘Design’ tab with the help of
‘Delete’ button.