Banner MULTI-BEAM Series - Manual

MULTI-BEAM ® Sensors
Compact modular self-contained photoelectric sensing controls
Printed in USA P/N 32887
Product
Line
Specifications
•
•
•
•
•
Modular design with interchangeable components (scanner
blocks, power blocks, and logic timing modules);
over 5,000 sensor configurations possible
Scanner blocks for opposed, retro, diffuse, convergent, and
fiber optic sensing modes (including high-gain models)
Power blocks for ac or dc operation, including 2-wire ac
operation
Logic modules to support a wide variety of delay, pulse, limit,
and rate sensing logic functions
Most scanner blocks include Banner's exclusive, patented
AID™ (Alignment Indicating Device) system, which lights a
top-mounted indicator LED whenever the sensor sees its
own modulated light source, and pulses the LED at a rate
proportional to the strength of the received light signal.
3.7"
(94 mm)
1.6"
(40 mm)
4.5"
(114 mm)
2.1" (53 mm)
Status Indicator LED
(except emitters)
Lens Centerline
Access to
Sensitivity Adjustment
2.36"
(60.0 mm)
0.30"
(7.6 mm)
0.20"
(5.1 mm)
5 mm (#10) Screw
Clearance (4)
1.18"
(30.0 mm)
1/2" – 14 NPSM
Conduit Entrance