Nforce™ led lightbar – SoundOff Signal nFORCE LED User Manual
Page 15
IMPORTANT INFORMATION:
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact
Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800338.7337 (press #4 to skip the automated message).
Questions or comments that do not require immediate attention may be emailed to
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
nFORCE™ LED Lightbar
nForce Lightbar 05.14
Connection of Lightbar Breakout Box to SoundOff Signal Siren:
Note: Requires PC configuration app to map siren control switches to lightbar functions
Plug 1 end of RJ-45 cable to available jack on siren amplifier
Plug other end of RJ-45 cable to ‘siren’
ETSA481CSR or ETSA482CSR
CN6
CN2
Breakout Box
Lightbar
CN3
CN8
CN5
ETSA481RSP, ETSA482RSP, ETSA461HPP, ETSA462HPP
RJ-45 Splitter
(user supplied)
Siren Controller
Breakout Box
Lightbar
ETSA380R or ETSA385HR
Breakout Box
Lightbar
4" RJ-45 Jumper
Cable
15.