Manually adjusting the focus, Infinity focus – Canon DC100 EN User Manual
Page 44
![background image](/manuals/59535/44/background.png)
44
Manually Adjusting the Focus
Autofocus may not work well on the following subjects. In such case, focus manually.
To change the operating mode, refer to About the Operating Modes (
11).
Mode switch:
1. Adjust the zoom.
2. Press
(
).
“MF” appears.
3. Adjust (
) the focus as required until the image
appears focused.
Pressing
(
) again will return to autofocus.
The camcorder will automatically return to autofocus when you set the mode
switch to
.
Readjust the focus when you have turned off the camcorder.
Infinity Focus
Use this function when you wish to focus on faraway subjects such as mountains or
fireworks.
1. Adjust the zoom.
2. Keep
(
) pressed down for more than 2 seconds.
• “
” appears.
• Pressing
(
) again will return to autofocus.
If you operate the zoom or the multi selector (
) during infinity focus, “
”
changes to “MF” and the camcorder returns to manual focusing mode.
Reflective
surfaces
Subjects with low
contrast or without
vertical lines
Fast Moving
Subjects
Through
dirty or wet
windows
Night Scenes
FOCUS
FOCUS
FOCUS
FOCUS