VICI D-3-I-7890 - Manual (Page 14)

10
Installation
11. Scroll to select the second line and press <Enter>. The display will read:
CAUTION: Instrument power must be turned off
and back on for set point to take effect.
12. Do not turn off the GC; instead press <Enter>. The display should read:
CONFIGURE BACK DETECTOR
Configured: Channel Partner
Ignore Ready = False
[B-det] = (Signal) (FID)
13. Turn off the GC and power it back up. Verify the configuration by
pressing <Back Det>. The display should read:
Back detector (CP)
Temperature
xx. .x
Output xxxx