Installation instructions, Step 7, Step 8 – Quoizel IE2825BN Ibsen User Manual
Page 4: Step 9, Step 10
4 OF 4
INSTALLATION INSTRUCTIONS
STYLE NUMBER IE28 25BN
:
STEP 7:
a. Thread the short nipple end of the Stem into the
Coupling underside of Socket Cluster. Using plier
thread the Hex Nut against the Coupling and
hand tighten until snug
,
.
STEP 8:
a. Adjust the Hex Nut on the bottom end of the Stem to
proper location for rest components.
b. Place the following components over the end of the
Stem in turn:
Flat Washer, Rubber Washer, Shade, Rubber
Washer and Flat Washer.
c. Thread Hex Nut onto the end of the Stem and
tighten gently until snug to secur e the above parts.
STEP 9:
a. Place the Cap over the end of the Stem and secure
with the Finial. Hand tighten until snug.
Socket Cluster
Stem with Hex Nuts
Stem with Hex Nuts
Flat Washer
Flat Washer
Rubber Washer
Rubber Washer
Coupling
Shade
Hex Nut
Stem Assembly
Cap
Finial
STEP 10
:
a. Install correct Bulbs r eferring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.