Quoizel DH1616AN Duchess - Manual (Page 2)

ASSEMBLY INSTRUCTIONS
Nipple
Hex Nut
Ceiling Canopy
STEP 2 :
a. Thread another Hex Nut onto the other end of
the nipple. Thread this Hex Nut on just enough
so the inside surface of the pan rests against it.
You may have to trial fit the Ceiling Canopy
one more times to insure this distance also.
This Hex Nut is needed here to prevent you
from crushing down the center of the Ceiling
*
2 OF 3
STEP 3 :
* ( )
.
.
.
( )
. ( )
( ).
.
.
Use Wire Connectors not supplied to connect
the wires
a Connect the House Ground Wire to the Fixture
Ground Wire.
b Connect the House White Wire to the Fixture
Supply Wire White or Ribbed Side .
c Connect the House Black or Red Wire to the
Fixture Supply Wire Black or Smooth Side
d Wrap each connection with approved electrical
tape and carefully stuff all of the connected wires
into the Outlet Box
WHITE WIRE
BLACK OR RED WIRE ( )
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
STEP 6
.
:
a Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
Nipple
Ceiling Canopy
Ceiling
Canopy
Flat Washer Lock Washer
Stem with Hex Nut
Hex Coupling
Hex Coupling
STEP 4 :
.
.
*
a Position the Ceiling Canopy to the ceiling by .
passing the Nipple through the center hole
b Slip on the Flat Washer and the Lock Washer and
then thread the Hex Coupling to the bottom end of
the Nipple
Snug down assembly until the Ceiling
Canopy is flush against the ceiling
Be sure that there are no trapped or pinched
wires along the edge of the pan.
.
.
STEP 5 :
a Thread the beaded end of the Stem into the Hex
Coupling underside of the Ceiling Canopy. Hand
tighten until snug.
.
STYLE NUMBER DH1616AN,DH1616PN :