Ceiling – Quoizel EMP1616C Empress User Manual

Page 3

Advertising
background image

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

3of4

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

,

.

.

.

2014 QuoizelInc.

Assembly Instruction Sheet #IS-EMP1616C

For Style EMP1616C

January2014

Figure 1

STEP 1

- Attach Inner Backplate to Outlet Box

A. Place the Crossbar (C) onto the Ceiling surface and line

up one set of holes onto mounting holes on Outlet Box.
Using a pencil, mark the locations for Wall Anchors (G).

B. Remove the Crossbar (C) and drill holes from the marks

and then push the Wall Anchors (G) into the holes.

C. Position the Crossbar (A) back onto the Ceiling. Thread

the Outlet Box Screws (not supplied) into the mounting
holes on the Outlet Box to secure it. Hand tighten until
snug.

D. Pass the Washers (I) over the Self-tapping screws (H)

and then thread the self-tapping screws (H) into the Wall
Anchors (G). Hand tighten until snug.

Ceiling

Wall Anchor

Self-tapping

Screw

Crossbar

Outlet
Box

Mounting
Hole

Figure 3

STEP 3

Make Wire Connections

-

A. Use standard wire connectors to make all wire

connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.

B. Connect White Supply Wire from the Outlet Box to White

Wire from fixture.

C. Connect Black (or Red) Supply Wire from the Outlet Box

to Black Wire from fixture.

D. Connect Ground Wire from the Outlet Box to Ground

Wire from fixture.

E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and

carefully stuff all the connected wires into the Outlet Box.

Figure 4

White wire from supply

White wire from fixture

Black wire from supply

(or Red)

Black wire from fixture

Ground wire from supply

Ground wire from fixture

Outlet Box

Screw

Figure 2

STEP 2

Remove the Protective film

-

A. Remove the Protective Film for Fixture Body (E).

Protective film

Fixture Body

Washer

Advertising