Quoizel DE8409K Devon - Manual (Page 6)

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc.
6of6
STEP 9
- Assemble Strut Member and Finial
A. Remove the Strut Member and the Nipple from the Finial.
B. Screw one end of the Nipple into the Hex Coupling on the
bottom center of the Fixture Body (F). Hand tighten until
snug.
C. Pass the Strut Member over the top end of the Nipple and
secure with the Finial. Hand tighten until snug.
Figure 10
August2011
Assembly Instruction Sheet #IS-DE8409K
For Styles DE8409K
Hex Coupling
Nipple
Strut Member
Finial
Fixture Body
STEP 10 Apply Silicone Sealer to Mounting
Balls
-
A. To prevent moisture from entering the wire
compartment, apply a small amount of silicone sealer
(not included) to the threaded side of the mounting
balls (E) and then install them onto the mounting
screws (B). Wipe off excess caulk.
Figure 11
Mounting Ball
STEP 11 Apply Silicone Sealer to Backplate
-
A. Make sure exterior wall surface and fixture backplate
are free of dirt before applying caulk. Using exterior
grade caulk, start on one side of fixture backplate and
follow contour, where the fixture backplate meets the
exterior wall surface upward. Proceed to caulk over top
of backplate and down other side. Do not caulk bottom
of fixture backplate to ensure proper moisture
drainage.
Your lamp wall fixture is now assembled and ready to
use. Enjoy!
Exterior
Grade Caulk
Outdoor Fixture
Backplate
Exterior
Wall Surface
Figure 12