SARGENT 8500 Narrow Design Rim Exit Device - Manual

1
CAUTION: BEFORE STARTING
• INSTALL MULLION IF USED
• DOOR SHOULD BE FITTED AND HUNG
• CHECK BOX LABEL FOR SIZE OF
EXIT DEVICE FUNCTION AND DESIGN
AVAILABLE STOCK LENGTHS
Length “E": 32" door
Can be cut to fit doors down to 24" wide.
Length “F": 36" door
Can be cut to fit doors down to 33" wide.
Length “J": 42" door
Can be cut to fit doors down to 37" wide.
Length “G": 48" door
Can be cut to fit doors down to 43" wide.
1
IMPORTANT: SURFACE OF DOOR WHERE EXIT
DEVICE IS TO BE APPLIED MUST BE FLUSH. CLEAR
AWAY ANY RAISED PROJECTIONS TO ALLOW EXIT
DEVICE TO REST FLAT ON SURFACE OF DOOR.
APPLY STRIKE TO FRAME
OR MULLION
650A MULLION WITH 658 FLAT
STRIKE (ALTERNATE STRIKE)
SURFACE APPLIED 649 STRIKE, 12-8500, AD8500, OR
OPTIONAL STANDARD APPLICATION
INTEGRAL STOP
657 STRIKE
SURFACE APPLIED 657 STRIKE
(STANDARD STRIKE)
BLADE STOP
657 STRIKE
ATTACH WITH SCREWS
PROVIDED. FURNISHED
WITH 650A MULLIONS
ATTACH WITH (2) STRIKE SCREWS
AND USE (2) LOCK WASHERS
BETWEEN FRAME AND STRIKE
DRILL AND COUNTERSINK FOR 1/4"
FLAT HEAD SCREWS
ALUMINUM FRAMES: DRILL (2) 3/8" HOLES FOR
MOLLY-JACK NUTS. REINFORCED METAL FRAMES:
DRILL AND TAP (2) 10-24 HOLES
DRILL (2) 3/8"
HOLES FOR
MOLLY-JACK NUTS
INSTALLATION INSTRUCTIONS
8500 / 12-8500 / AD8500 Narrow Design Rim Exit Device
FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 • www.sargentlock.com
Copyright © 2009-2012, Sargent Manufacturing Company,
an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A6699N
STRIKE
#657
SHOWN
HORIZONTAL
REFERENCE LINE
(C CHASSIS AND
RAIL ASSEMBLY)
L
COVER
ARM
CHASSIS
VERTICAL REFERENCE
LINE (C CHASSIS)
L
RAIL
ASSEMBLY
MOUNTING
PLATE
END CAP
LOCK DOWN KEY
TO OPERATE:
— DEPRESS PUSH RAIL;
— INSERT HEX KEY AND
TURN CLOCKWISE
DRILL (2) 3/8"
HOLES FOR
MOLLY-JACK NUTS
L980 MULLION
656 STRIKE