Louisville Tin and Stove BBT104 - Manual (Page 8)

Page 8
THREADED
END
CUT THE AIR INTAKE 1-1/2” LONGER
THAN THE WALL THICKNESS (Do not
cut to less than 5-1/2”)
CUT THE EXHAUST TUBE
FROM THE UNTHREADED
END, USE THE CUT-OFF
SECTION FROM THE AIR
INTAKE TUBE AS A GUIDE
(Do not cut to less than 7-1/2”)
Measure
Wall
Thickness
FIGURE 5
HEATER MUST BE LEVEL
USE THE MOUNTING HOLES PROVIDED
IN THE CASING BACK TO MOUNT
BASEBOARD TO WALL. AT LEAST
ONE MOUNTING HOLE MUST ALIGN
WITH A WALL STUD.
FIGURE 7 FIGURE 8
BASEBOARD
HEATER
WEATHER
SEAL
Black wire
to L2 on
control
module
Black wire to L1
on control
module
White Wire
(Electric
Connection)
Wire Nuts
Green Wire
(Ground Wire)
Black Wire
(Electric
Connection)
Junction Box Cover
Electric Power Supply
FIGURE 9
BASEBOARD
HEATER
1-1/2”
1”
EXHAUST
TUBE
AIR INTAKE
TUBE
EXTERIOR WALL
FIGURE 6