CTEK Z4200U SkyRouter - Manual (Page 17)

2 March 2014
13
APN – Provided by the network operator. Determines what IP addresses are assigned to the mobile station, what security
methods are used, and how the GSM data network connects to the customer’s network.
PDP Address – Provided by the network operator. Specifies the address of a particular device’s Packet Data Protocol
context area in the network.
Authentication – Available settings are None, PAP, CHAP, BOTH. Usually set to none but may be required on some
networks.
LCP Echo – Used on some International networks. For all US networks LCP echo packets should be turned off, meaning
this box should be unchecked. If you have questions check with Ctek support.
SMSC Address – Short Message Service Center Address. A number prefixed with a plus (+) sign that specifies the
service center that will handle SMS traffic. Provided by the network operator.
Email Gateway – A number (address) specifying a gateway that will transform email to SMS and SMS to email. Provided
by the network operator. Note that emails targeted at SMS delivery have network dependent formats.
4.2.2 Configuring The Ethernet Interace
The Ethernet configuration determines how devices connected to the LAN side of router will be addressed, and what the
actual address of this router will be on the LAN.
Figure 11 - Ethernet Configuration