Nikon F100 - Manual (Page 30)

Number of shots and Electronic analog
compensated EV value exposure display
Shooting order
t2F0.3 0, +0.3
t2F0.7 0, +0.7
t2F1.0 0, +1.0
y2F0.3 0, –0.3
y2F0.7 0, –0.7
y2F1.0 0, –1.0
3F0.3 0, –0.3, +0.3
3F0.7 0, –0.7, +0.7
3F1.0 0, –1.0, +1.0
t3F0.3 +0.3, 0, +0.7
t3F0.7 +0.7, 0, +1.3
t3F1.0 +1.0, 0, +2.0
y3F0.3 –0.3, –0.7, 0
y3F0.7 –0.7, –1.3, 0
y3F1.0 –1.0, –2.0, 0
59 58
Auto Exposure/Flash Exposure Bracketing
—continued
Exposure
• Rotating the Sub-Command Dial while pressing the Auto Exposure/Flash
Exposure Bracketing button W changes the setting as follows (when
compensation value is set in steps of 1/3, 1/2 or one with Custom Setting):
1. With 1/3 steps
2. With 1/2 steps
Number of shots and Electronic analog
compensated EV value exposure display
Shooting order
t2F0.5 0, +0.5
t2F1.0 0, +1.0
y2F0.5 0, –0.5
y2F1.0 0, –1.0
3F0.5 0, –0.5, +0.5
3F1.0 0, –1.0, +1.0
t3F0.5 +0.5, 0, +1.0
t3F1.0 +1.0, 0, +2.0
y3F0.5 –0.5, –1.0, 0
y3F1.0 –1.0, –2.0, 0
3. With one steps
Number of shots and Electronic analog
compensated EV value exposure display
Shooting order
t2F1.0 0, +1.0
y2F1.0 0, –1.0
3F1.0 0, –1.0, +1.0
t3F1.0 +1.0, 0, +2.0
y3F1.0 –1.0, –2.0, 0
3 Compose picture, focus and shoot.
• Compensated shutter speed and aperture values are displayed during
shooting.
• To cancel the Bracketing, rotate the Main-Command Dial while pressing the
Auto Exposure/Flash Exposure Bracketing button W so z disappears
from the LCD panel. The number of shots and compensated EV values
previously selected will remain.
• If the exposure compensation function (page 56) is also set, Bracketing will
be combined with the exposure compensation values. It is useful to perform
Bracketing with a compensated value of over +2 EV or under –2 EV.
• With film advance mode in continuous shooting (C or Cs), fully depress and
hold the shutter release button until the set number of shots has been
taken and film advance stops automatically.
• If the end of the film roll is reached during Bracketing, the remaining shots
can be taken after new film has been loaded. Also, if you turn the power
switch off during Bracketing, the remaining shots can be taken after the
power is turned back on.
• Bracketing is performed with one frame at a time when the self-timer (page
67) is set.
· 3 : Bracketing order can be set to change from negative EV value to
positive EV value (page 71).
P500 (E) 02.12.27 5:48 PM Page 58
WWW.LENSINC.NET