Dynalco TMP-100DC Temperature Monitor - Manual (Page 2)

Toll Free 800.368.6666 (US & Canada) • Tech Support 800.950.2382
Main 954.739.4300 • Fax 954.484.3376 • www.dynalco.com
3690 NW 53rd Street, Ft. Lauderdale, FL 33309 USA
A division of Crane Co.
PART NUMBERS AND RANGES
P/N RANGE SENSOR TYPE
TMP-100DC-11 -50º to +1500ºF J (Iron-Constantan)
TMP-100DC-12 -45º to +815ºC J (Iron-Constantan)
TMP-100DC-13 -50º to +1800ºF K (Iron-Alumel)
TMP-100DC-14 -45º to +980ºC K (Iron-Alumel)
TMP-100DC-15 0º to +500ºF T (Copper-Constantan)
TMP-100DC-16 -20º to +260ºC T (Copper-Constantan)
TMP-100DC-17 0º to +500ºF E (Chromel-Constantan)
TMP-100DC-18 -20º to +260ºC E (Chromel-Constantan)
TMP-100DC-19 -300º to +800ºF 100 Ohm Pt RTD
TMP-100DC-20 -185º to +425ºC 100 Ohm Pt RTD
NOTE
For the TMP-100DC, thermocouples used must
be ungrounded if the dc supply is grounded.
OUTLINE AND CONNECTION DRAWING
Dimensions in inches (cm)