Campbell Hausfeld AL2270 - Manual

Notes
Notas Assembly Instructions AL2270 and
and Parts List AL2275
Please read and save these instructions. Read carefully before attempt-
ing to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure
to comply with instructions could result in personal injury and/or proper-
ty damage! Retain instructions for future reference.
Paint
Rollers
BUILT TO LAST
Operation
Do not remove spray tip to attach roller
until all pressure is released and sprayer
switch is turned off.
ROLLER ATTACHMENT
1. Remove spray tip from the gun.
2. Place sealing washer in the roller attachment fitting.
! CAUTION
For parts, product & service information
visit www.chpower.com
© 2002 Campbell Hausfeld/Scott Fetzer IN453401AV 11/02
Sealing Washer
Figure 1
453401 1102 11/12/02 3:02 PM Page 16