Dell PowerEdge Rack Enclosure 4220 - Manual (Page 9)

Cable Routing Procedures for Dell™ PowerEdge™ R510 Systems
Page 7
Figure 7: Cable Routing Without a CMA
2.2 Removing the CMA Brackets for Shallow Racks
If you are installing the system into a shallow rack (less than 1 meter deep) and you will not be installing a
CMA, the outer CMA brackets may be removed if necessary in order to allow the rails to fit properly into
the rack. Remove the brackets by removing the screws used to attach them to the rails with a #2 Phillips
screwdriver as shown in Figure 8.
Figure 8: Removing the CMA Brackets for Shallow Racks