Clarion CX501 - Manual (Page 27)

Operations Common to Each Mode
English
27
CX501
● Performing memory reset
This function allows you to reset adjusted
settings in the memory. The stored settings like
last operation mode, volume setting, preset
channels, MAGNA BASS EXTEND setting,
adjust mode settings and sound mode settings
can be formatted by this function.
Note:
• The settings will remain in the memory even if
you turn the power off or press the reset button.
2-1. Select “RESET”.
3-1. Press and hold the [ROTARY] knob
(1 sec.).
“RESET” appears in the display, then the
unit will be restarted automatically and the
memory will be cleared.
AUX function
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
● Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗ The factory default setting is “MID”.
1. Press and hold the [DISP] button (1 sec.).
2. Select “AUX SENS”.
3. Turn the [ROTARY] knob to select “HIGH”,
“MID” or “LOW”.
Note:
• When AUX mode is selected, AUX IN sensitivity
can be set.
CX501_ENG.book Page 27 Thursday, November 4, 2010 3:55 PM