Replacing the i/o panel – Dell PRECISION 530 User Manual
Page 98
Advertising
98
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
3
Disconnect the control panel cable from the control panel connector.
Disconnect the front-panel cable from the connector on the system
board.
4
Remove all cables that are connected to the front I/O panel.
5
From inside the chassis cover, remove the mounting screw that secures
the front I/O panel to the chassis.
6
Remove the front I/O panel from the chassis.
Re m o v i n g t h e I / O Pa n e l
Replacing the I/O Panel
To replace the front I/O panel, perform the
in reverse,
ensuring that the upright, notched tab on the chassis fits through the hole
at the end of the control panel.
Advertising