QHYCCD QHY CFW1 User Manual
Page 5
Click “OK” to finish off the configuration, and select “Connect” to start your imaging session.
You may now individually change filters by simply selecting the filter you want in the drop down list
You may rename the filters if you like. Look up the help in
Maxim DL on how to do this.
In this example, Red is in Slot 1, Green in slot 2 and so on.
In this example, the first slot (Red Filter) is selected, and the filter wheel will immediately move to the
selected position if its not on it already. Remember, the name is deceiving, as it is just a reference. It is the
slot position that determines the filter to be used.
Here once again in the “Options” menu of “Autosave” in MaximDL you can select your filters.