Qmark WHT500 - Utility Well House Heaters - Manual

FRONT VIEW
21"
5"
1"
LEFT END
VIEW
3 1/2"
2 1/2"
5"
TOP VIEW
1 1/2"
Surface Mounted
Utility Heater
HT500
Read Carefully - This instruction sheet contains vital information for
the proper installation, use and efficient operation of the heater.
Carefully read the manual before installation, operation or cleaning
of the heater. Failure to adhere to the instruction could result in fire,
electric shock, death, serious personal injury or property damage.
Save these instructions and review frequently for continuing safe
operation and instructing future users.
WARNING: HAZARD OF FIRE OR ELECTRICAL SHOCK
1. To prevent a possible electric shock, disconnect all power to
heater at main service panel before wiring or servicing.
2. All wiring must be in accordance with the National and Local
Electrical Codes and the heater must be grounded.
3. Do not install closer than 18” (456mm) to the floor or 12”
(304mm) from the ceiling. End of heater may be next to adjacent
walls. Do not install in vertical position.
4. Heater is hot when in use. Do not install the heater behind door,
behind towel rack, in closet, where curtains or drapes can touch
heater or where air flow through the heater may be obstructed.
Keep electrical cords, bedding, furniture and other combustible
away from heater.
5. Do not operate heater without cover in place. Cover must be
secured with screws to prevent unintentional removal.
6. Do not insert or allow foreign objects to enter or touch the heater
or heating element as this may cause an electric shock, fire or
damage to heater.
7. Heater has hot and arcing or sparking parts inside. Do not use
in areas where gasoline, paint, or flammable liquids are used or
stored.
8. Do not use this heater in an environment where heater will be
subjected to direct contact with water.
9. Do not use in a corrosive environment.
10. Supply voltage must be the same as heater voltage. Check
heater nameplate and supply voltage before energizing.
WARNING
SAVE THESE INSTRUCTIONS
Installation & Maintenance Instructions
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by a division of Marley
Engineered Products. You have made a wise investment selecting the highest quality product in the heat-
ing industry. Please carefully read the installation and maintenance instructions shown in this manual.
You should enjoy years of efficient heating comfort with this product from Marley Engineered Products...
the industry’s leader in design, manufacturing, quality and service.
... The Employees of
Marley Engineered Products
1
!
FILE #21609
3-1/2
(89mm)
(127mm)
(532mm)
(89mm)
(25mm)
(63mm)
5”
(127mm)
21”
(532mm)