Takata Racing DRIFT III SNAP User Manual

Page 4

Advertising
background image

3 4

3. Post-Accident

In addition to replacing any harness belt which was in use, also carefully
check all seatbelt anchor points for deformation or cracks. Always make
sure that the guidelines of the car manufacturer are followed if a repair is
necessary.

Never use or re-use any harness restraint which was in

use during an accident.

Never use any restraint system which does not function

properly.

Never repair a harness restraint. Use manufacturer

provided spare parts only.

Never expose the harness restraint to acids or bases.

Components may be weakened and will fail during an

accident. Severe injuries or death may occur.



TAKATA reserves the right to incorporate any technical changes or
further development in this product without notice. Our web site will
inform you about actual instructions and products. Also regional
representatives and further importers are listed by countries.

A

DDRESSES

World-Wide Sales [except North America and Japan]:

SCHROTH Safety Products GmbH

P.O. Box 2440

59714 ARNSBERG

GERMANY

Phone: +49 (0) 2932-9742-0
FAX:

+49 (0) 2932-9742-42

eMail:

[email protected]

www.takataracing.com

North American-Importer:

HMS Motorsport, Ltd.
9A Electronics Avenue
Danvers, MA 01923
USA

Toll Free: (855) 4-TAKATA / (855) 884-2358
Phone:

(978) 406-4116

FAX:

(978) 774-1548

eMail:

[email protected]

www.takataracing.com










The copyrights of this Installation and Operating manual are property of
TAKATA Racing, Germany.

Copyright of this part or in hole, on paper, on film or electronically is
allowed only after written permission by TAKATA Racing, Germany.

© 2012, TAKATA Racing, Arnsberg, Germany

7

8

Advertising
This manual is related to the following products: