Crestron electronic Isys G-Series TPS-15G-QM - Manual (Page 50)

Isys ® G-Series Touchpanels Crestron TPS-12G/15G/17G-QM
Hardware Connections for the TPS-12G/15G/17G-QM
QM IN:
QUICKMEDIA
VIDEO, AUDIO
& MIC INPUT
OVER CAT5
QM IN:
QUICKMEDIA
VIDEO, AUDIO
& MIC INPUT
OVER CAT5
QM OUT:
QUICKMEDIA
VIDEO, AUDIO
& MIC OUTPUT
OVER CAT5
HEADPHONES
NET*:
TO CONTROL
SYSTEM AND
OTHER CRESNET
DEVICES
LAN:
10BASE-T/100BASE-TX
HIGH SPEED
ETHERNET TO LAN
RS-232:
TO COMPUTER OR
OTHER RS-232
DEVICE
GROUND
USB:
FROM MOUSE OR
EXTERNAL
TOUCH DEVICE
24VDC:
AC POWER PACK
COMPACT FLASH
CARD and
PC CARD SLOTS
(PC CARD SLOTS
RESERVED FOR
FUTURE
APPLICATIONS)
* For the TPS-17G-QM only, an interface module (TPS-17G-QM/-L-IMC) is included. Refer to the latest revision of the TPS-17G-QM/-L-IMC
Power Interface Module guide (Doc. 6783) for details.
CAUTION: Do not connect the TPS-17G-QM directly to the Cresnet network bus.
NOTE: Ensure the unit is properly grounded.
CAUTION: Do not apply excessive pressure to the touchscreen display during
handling. Doing so can crack the screen and damage the touchpanel.
NOTE: The maximum continuous current from equipment under any external load
conditions shall not exceed a current limit that is suitable for the minimum wire
gauge used in interconnecting cables. The ratings on the connecting unit's supply
input should be considered to prevent overloading the wiring.
NOTE: The headphone output includes WAV data, QM and Mic Input.
NOTE: Audio, video and QuickMedia connections must use Crestron Certified Wire
(CresCAT-QM, CresCAT-IM) to ensure optimum performance.
46 • Isys ® G-Series Touchpanels: TPS-12G/15G/17G-QM Operations Guide – DOC. 6415B