Unpacking and checking contents (figure 3), Awarning – Craftsman 152.213361 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UNPACKING AND CHECKING
CONTENTS (Figure 3)
This Dust Collector will require a minimal amount of
assembly.
Remove all of the parts from the shipping box and lay
them on a clean work surface. Compare the items to
figure 3, verify that all items are accounted for before
discarding the shipping box.
AWARNING
If any parts are missing, do not attempt to plug in the
power cord and turn "ON" the Dust Collector. The Dust
Collector can only be turned "ON" after all the parts
have been obtained and installed correctly.
Fig. 3
M
A.
Motor and blower assembly
J.
Lower Support Rod
B.
Base
K.
4-inch flexible hose
c.
Swivel caster (4)
L.
4-inch hose clamp (2)
D. Side support (2)
M. 5/16-18
X
5/8" Hex head screw (12)
E. Filter bag
N. 5/16" Lock washer (4)
F.
Collection bag
0. 5/16-18 Hex nut (1)
G. Locking band (2)
P.
Intake port cap
H. Support
Q. 5/16-18 Flange hex nut (8) (not shown)
1.
Filter Bag Hanger
R.
3/8-16 Flange hex nut (4) {not shown)