Q loading the battery, Load the new battery, H] loading the battery – Canon IXUS Z70 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[Q Loading the Battery
Battery: One lithium battery (CR2)
1
Open the battery cover.
• While pressing the
H
mark on the battery cover,
slide the battery cover off
Load the new battery.
• Insert the battery with the +
and - terminals positioned
correctly.
li^ is displayed on the
LCD panel.
m
Close the battery cover.
• Slide the battery cover
closed.
^ If"............" blinks in the LCD
panel, after you change
the battery, you will need
to reset the date to the
correot date and time (—>
46).
0
• * After removing the battery to replace it, do not touch
any of the switches on the camera. This will allow the
date and time settings to be retained for
approximately five seconds.
015