Setting the time, Dispiay the date and time, Seiect the time setting – Canon ZOOM76 User Manual
Page 33: Set the time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Date and Time
Setting the Time
Dispiay the date and
time.
• Press the MODE button to
display the date and time
• Refer to the previous page
to set the date.
Seiect the time setting.
• Press the SELECT button to
select the setting
^ The selected setting
(blinking numbers)
changes sequentially from
hour to minute
Set the time.
• Press the SET button to set
the time.
• Repeat steps 5 and 6 to set
all the time settings
• If you press the SELECT
button and none of the time
settings blink, time setting
is complete
•
i
• If you replace the battery, the date display on the LCD
panel changes to " '94 1 1". When this occurs, reset
3
the date and time
• Each time the SET button is pressed, the number
increases by one. If kept pressed, the number
increases quickly.
0-35